DIY Maintenance for Treadmills
Search
-
Treadmill Care and Maintenance
Approved Cleaners and Proper Cleaning Technique Horizon recommends using a mild soap and water solution (1:10 soap to...
-
Caring for the Deck and Belt
Always power off the treadmill and disconnect the power cord from the outlet before performing these tasks. Running D...
-
Running Deck/Belt Lubrication – for Silicone Surfaces ONLY
IMPORTANT: Check the Owner’s Manual to see if your treadmill has a silicone running deck/belt or a waxed running deck...
-
Running Surface Type
There are 2 different running surfaces on residential treadmills: silicone oil OR waxed surface. It is important to k...
-
Running Belt Adjustments
Once the treadmill is positioned where it will be used, the running belt must be checked for proper tension AND align...
-
Treadmill Supplies
All treadmills come with a t-handle wrench to be used to make running belt adjustments. Treadmills with silicone runn...
-
TREADMILL BELT SPEED TROUBLESHOOTING GUIDE
For information on the Erratic Treadmill Speed - Service Bulletin, please click here. Users of T101-05 treadmills man...
-
How to Clean the Rollers on a Treadmill
For a video on how to, please visit T101 Roller Cleaning For assistance, please call 888.878.9011 or email support@ho...
-
How Do I Lubricate My Treadmill With a Syringe?
Please note that a syringe is not included with purchase. For instructions without a syringe, please click here. Im...
-
How Do I Remove A Treadmill Motor Cover?
To remove the motor cover on most Horizon treadmill models, you may follow the helpful video guide available here You...
-
How to Calibrate a Treadmill
The PDF below will outline the instructions for manual calibration for the following models: Omega, Quantum, Paragon,...