Skip to main content
Horizon Fitness Help Center home page
  • Community
  • Submit a request
  • Sign in
  1. Horizon Fitness
  2. Troubleshooting & Maintenance
  3. DIY Parts Replacement
  4. DIY Parts Replacement for Ellipticals

How to Replace the Console Cable on an Elliptical

Article author
Horizon Fitness
  • Updated August 26, 2021 17:14

The PDF attached will outline the instructions needed to replace the console cables on the EX-22, EX-33, EX-44, CSE 3.5, CSE 4.5, and EG5.

 

For assistance, please call 888.878.9011 or email support@horizonfitness.com. To order replacement parts, visit parts.horizonfitness.com or email parts@horizonfitness.com.

  • Replacing Console Cable Replacement on an Elliptical.pdf200 KB

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Related articles

  • How Do I Fix Console Display Issues on an Elliptical?
  • MCB LED Blink Code
  • Software and Firmware Updates
  • Horizon Fitness CE5.2 Elliptical
  • Elliptical Lower Control Board Replacement

Comments

0 comments

Article is closed for comments.

Articles in this section

  • How To Replace Link Arm Washer on Elliptical
  • How to Replace the Incline Motor on an Elliptical
  • Elliptical Lower Control Board Replacement
  • How to Replace the Tension Cable on an Elliptical
  • How to Replace the Resistance Motor on an Elliptical
  • How to Replace the Pivot Tube on an Elliptical
  • How to Replace the Pedal Axle on an Elliptical
  • How to Replace the RPM Sensor on an Elliptical
  • How to Replace the Flywheel-Drive Belt on an Elliptical
  • How to Replace the Console Cable on an Elliptical

See more

Français (Canada)