In order to reset the 'Lube Belt' Message on your unit, please follow the steps below.
For the T101, T202 and T303:
Simultaneously hold down the Speed up (+) button and the Stop button for 5-7 seconds
Simultaneously hold down the Speed up (+) button and the Stop button for 5-7 seconds
For the 7.0AT and older versions of the 7.4AT:
Simultaneously hold down the Speed up button on the console near the middle dial and the Stop button for 5-7 seconds.
For 7.4AT-04 Treadmills:
1. Update the console to the newest software.
2. Hold Speed Key 12 and the Stop button simultaneously for 5 seconds
to clear the message.
1. Update the console to the newest software.
2. Hold Speed Key 12 and the Stop button simultaneously for 5 seconds
to clear the message.
For the 7.8AT:
Simultaneously hold down the Play/Pause button and the Stop button for 5-7 seconds.
If you are still having issues, please make sure you have the latest software update by visiting https://www.horizonfitness.com/support/product-support/software-updates.
If, after trying all of the steps above, you are still having issues resetting the message, please see the attached document for master reset instructions. A video on the master reset can also be found here.
For further questions, please contact our tech support team by calling 1-800-244-4192 or send an email to techsupport@horizonfitness.com
- Master Lube Reset.pdf200 KB
Comments
0 comments
Please sign in to leave a comment.