In order to reset the 'Lube Belt' Message on your unit, please follow the steps below.
Make sure your unit is up to date by visiting Software and Firmware Updates
For the T101, T202 and T303:
Simultaneously hold down the Speed up (+) button and the Stop button for 5-7 seconds
Simultaneously hold down the Speed up (+) button and the Stop button for 5-7 seconds
For the 7.0AT and older versions of the 7.4AT:
Simultaneously hold down the Speed up button on the console near the middle dial and the Stop button for 5-7 seconds.
For 7.4AT-04 Treadmills:
1. Update the console to the newest software.
2. Hold Speed Key 12 and the Stop button simultaneously for 5 seconds
to clear the message.
1. Update the console to the newest software.
2. Hold Speed Key 12 and the Stop button simultaneously for 5 seconds
to clear the message.
For 7.4AT-04 Treadmills updated to software update version 4.006 or newer:
1. Hold the Media Play/Pause key and the Stop button simultaneously for 5 seconds
to clear the message.
to clear the message.
For the 7.8AT:
Simultaneously hold down the Play/Pause button and the Stop button for 5-7 seconds.
If you are still having issues, please make sure you have the latest software update by visiting https://www.horizonfitness.com/support/product-support/software-updates.
If, after trying all of the steps above, you are still having issues resetting the message, please see the attached document for master reset instructions. A video on the master reset can also be found here.
For further questions, please contact our tech support team by calling 1-800-244-4192 or send an email to techsupport@horizonfitness.com
- Master Lube Reset.pdf200 KB
Comments
0 comments
Please sign in to leave a comment.