Getting Started

1. Check to make sure no objects are placed on the pedals that will hinder the movement of the incline elliptical.

2. Plug in the power cord and turn the incline elliptical ON. (The ON/OFF switch is next to the power cord.)

3. You have two options to start your workout:

A) QUICK START UP

• Simply press the START key to begin working out. Time, distance, and calories will all count up from zero. OR...

B) SELECT A PROGRAM

1. Select your USER by turning the workout knob and then pressing when your desired USER is displayed.

2. Select your WEIGHT by turning the workout knob and then pressing when your desired WEIGHT is displayed.

3. Select your PROGRAM by turning the workout knob and then pressing when your desired PROGRAM is displayed.

4. Adjust the SETTING by turning the workout knob and then pressing when your desired SETTING is displayed.

5. Press START to begin.

Finishing your workout

When your workout is complete, the console will display “workout complete” and beep. Your workout

information will stay displayed on the console for 30 seconds and then reset.

To reset the console

Hold STOP key for 3 seconds.

To clear the current selection

To clear the current program selection or screen, hold the stop button for 3 seconds.

Bluetooth Heart Rate Monitoring

The 7.0AE is equipped with multi-channel Bluetooth which enables you to wirelessly connect compatible Bluetooth heart rate monitoring devices to this incline elliptical. You will need to ensure that your wireless heart rate monitoring device is Bluetooth 4.0 compatible and is also “open” to sharing data. Non-“open” or “closed” devices typically only share data with their proprietary apps. The 7.0AE needs an “open” device to receive data from the device. You may need to consult with your device’s owner’s manual or the manufacturer to confirm if it is an open device.

Turn on the Bluetooth 4.0 HR strap and make sure it is transmitting and correctly worn. Pair the receiver to the app and the console will receive the information from the tablet. To use the Bluetooth chest strap without a tablet, press and hold the Bluetooth button to enable the console to communicate with the receiver. When paired with the chest strap the console will not pair with a tablet. To enable tablet communication press and hold the Bluetooth button for 5 seconds or reset power.

Using your media player

The 7.0AE Elliptical will connect and stream music form your compatible music device. This includes many smart phones and traditional mp3 players.

Your 7.0AE Elliptical comes equipped with Bluetooth speakers. Bluetooth compatible devices can stream music wirelessly from your device to the speakers. You can also connect your music device via an audio cable and stream music through the speakers. Instructions for both types of audio connection are detailed below.

Connecting via Bluetooth 4.0LE

1) Check to ensure that your music device is Bluetooth 4.0 compatible

2) Go into your device’s Bluetooth settings and scan for devices.

3) On your music device, locate the Bluetooth device list. Select your treadmill or elliptical unit that appears on this list. Wait for your music device to finish pairing with the unit.

4) You will know when pairing is successful when your music device shows the treadmill or elliptical unit as now being a paired device.

When the unit is powered off then back on

If you turn your treadmill or elliptical unit off, or if it goes into sleep mode, the next time it is powered on the unit will look to pair with the last music device with which it was paired. It will automatically pair at this time.

Re-pairing music device

In the event that the unit cannot find the last paired music device (for example, the music device is off or not being used) then the unit will stop looking to pair with the music device. If this happens, and if you wish to use your music device again, then you will need to go through the pairing process listed above and re-pair through your music device’s settings.

Using multiple music devices

If multiple devices are being paired with the unit (i.e.: multiple users are using the treadmill or elliptical unit and pairing their music devices with it) then the unit will look to pair with the last device used and “forget” other devices. If you wish to re-pair a “forgotten” music device, then you will need to un-pair the current paired device and then re-pair your device through the pairing procedure noted above.

Connecting via an audio cable

1. Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the top right of the console and the headphone jack on your music device.
2. Use your CD / MP3 player buttons to adjust song settings.
3. Remove the AUDIO ADAPTOR CABLE when not in use.
4. If you don’t want to use the SPEAKERS, you can plug your headphones into the AUDIO OUT JACK at the bottom of the console. This ensures that if you accidentally catch the headphone line while moving, you won’t drop your device to the ground.

AFG Connected Fitness System

Your Horizon machine is Bluetooth ready, allowing you to use Bluetooth 4.0 technology to wirelessly connect your device to your Horizon Elliptical. Using the free downloadable AFG Fitness app will enable you to control your elliptical’s operating functions via your device. The app will also allow you to monitor your workout, track your progress and view your workout history. The AFG Fitness app can be downloaded from either the iTunes store for iOS devices or from the Google store for Android devices.

For information about connecting your device to your Horizon elliptical, setting up the AFG Fitness App and controlling and monitoring your workout with your device, see the AFG Connected Fitness Manual included with your elliptical.

For the owner's manual, click here.